Stabilizer is a pre-engineered, effective and permanent solution that restores structural integrity to a foundation wall. Bowed, sheared and tipped walls can be quickly repaired and restored with just one product.
Structural steel I-beams are vertically placed every 5′ – 6′ against the foundation wall and held in place by steel brackets below at the footer and above at the joists. The brackets are then tightened, transferring pressure from the beam to the wall.
Once securely in place, Stabilizer prevents any further bowing or bulging of the wall.
Adjustable Top Bracket
For use with joists running perpendicular to the foundation wall. Bolt assembly is adjustable in order to center the I-beam over the bulge in the wall.
Fixed Top Bracket
For use with joists running parallel to the foundation wall. Requires a precut length of 2 x 12 wood spanning at least 3 joists. The bracket is bolted to the 2 x 12, then the 2 x 12 is fastened to the joists to provide support.
Floor Bracket
Are fastened directly to the footer using two anchor bolts. For use when the floor is broken up and footer is exposed, typically during a French drain installation.
Slab Spike
Are used when the footer is weak or not accessible at all. Spikes are driven into the slab and use the strength of the floor to push the I-beam against the foundation wall.
Stabilizer Resources
Stabilizer Sales Flyer
Stabilizer Installation Guide
Stabilizer Structural Report
Stabilizer Overview Video