For wall crack repair using a low pressure injection method
Permanently and immediately stops and prevents actively leaking cracks
Quickly expands 400% – 600% and cures to form a flexible gasket in voids
Solvent-free and non-corrosive
Excellent bonding capabilities
Withstands shifting as a result of thermal cycles
RICHADH300
- Surface paste is a non-sag surface seal epoxy paste used for sealing cracks prior to injection
- Paintable 24- 48 hours after crack injection repair
RICH110
- Medium viscosity hydrophilic polyurethane resin
- Flexible expansive closed cell foam
- 1/16” or wider cracks
RICH115
- Ultra-low viscosity hydrophilic polyurethane resin
- Flexible closed cell foam
- Hairline to 1/16” wide cracks
Crack Injection Accessories
A full line of injection accessories are available including: convertible dual cartridge injection guns, 500-mL squeeze water bottle, surface mount injection ports and 1/4” diameter polyurethane mixer.
Crack Injection Resin Sales Flyer
Crack Injection Resin Instruction Sheets
Crack Injection Resin Technical Sheet